VCS VIP 1000 Betriebsanweisung PDF herunterladen (Seite 65)

Chapter 6 Configuring the Sender

VIP 1000 65

Multicast streaming:

Select one of the options MPEG-2, MPEG-4 or MPEG-2/MPEG-4 to enable

multicast streaming. Off disables multicast streaming.

Multicast address MPEG-2 ... Multicast address MPEG-4 Stream 2:

Enter a valid multicast address for each data stream, so that it will be accessible

in multicast mode (duplication of the data streams in the network)

When the multicast address is set to 0.0.0.0, the respective data stream is

accessible in multi-unicast mode (duplication of the data streams on the unit).

The VIP supports multi-unicast connections for MPEG-4 for up to 5 receivers

simultaneously.

Note

Duplication of the data on the unit for multi-unicast connections requires

considerable processor power and, under certain circumstances, leads to

limitations in the picture quality.

Port:

In the case of simultaneous data streams with the same multicast address the

data streams must be assigned to different ports.

Enter the port address for the particular multicast address here.

Multicast audio port (G.711):

If audio is to be transmitted in multicast mode, too, the audio data must be

assigned to another port as it is a separate data stream. The only exception to

this is the PRG stream in MPEG-2 which combines audio and video data to one

stream.

Enter the port address for the audio stream here.

Note

A separate audio stream is only transmitted if the corresponding function on

the Audio stream page is enabled (see page 49).

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 125 126

Keine Kommentare

VCS VIP 1000 Betriebsanweisung Seite 65