VCS VIP 1000 Betriebsanweisung PDF herunterladen (Seite 78)

Configuring the Receiver Chapter 7

78 VIP 1000

Disturbance sensitivity level:

Here you can define at what level the text display is triggered. The lower the value

the higher the sensitivity level of the VIP.

Notification text:

Enter the text that is to be displayed on the monitor. It can contain up to 31

characters.

Audio stream

In addition to video data, the unit can also send and receive audio signals. The

transmission of audio takes place at the same time as that of the video data in a

separate data stream. Thus it increases the data traffic. The audio data is coded

according to G.711 compression standard and requires an additional bandwidth

of about 80 kBit/s per direction.

Note

Sending of audio signals via the receiver is only possible if the audio

function of the sender is enabled (see page 49) and the checkbox Include

audio on the Decoder connection page is activated (see page 102).

Enable audio:

To transmit a separate G.711 audio stream choose On.

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 125 126

Keine Kommentare

VCS VIP 1000 Betriebsanweisung Seite 78